Specifications

CAN driver blocks for the CAN-AC2-104 (PC/104) with Philips SJA1000 CAN-Controller
4-35
Send driver block
The Send driver block is used to transmit data to a CAN-network from within
a block model.
The dialog box of the block lets you define the following settings.
Baud — The first control (popup menu) lets you define which physically
present board is used to send out the CAN messages defined by this block
instance. For more information about the meaning of the board number see the
Setup driver block described above. If just one board is present in the target
system, board number 1 should be selected.
CAN Port — The second control (popup menu) is used to select at which CAN
port the CAN message will be sent out.
CAN Identifier range — The third control (popup menu) is used to select the
identifier range of the CAN-messages sent out by this block instance. If an
application makes use of mixed Standard and Extended identifier ranges, at