Specifications

4 CAN I/O Support
4-32
Setup driver block
The Setup block is used to define general settings of the stacked CAN board(s).
The CAN driver blocks for this board support up to three boards for each target
system what leads to the availability of up to six CAN ports. For each board in
the target system exactly one Setup driver block has to be used in a model.
The dialog box of the Setup block lets you define the following settings.
Board — The first control (popup menu) lets you define which board is being
accessed by this driver block instance. The board number (1…3) can be seen as
a reference identifier in order to differentiate the boards if multiple boards are
present in the target system. The physical board finally referenced by the