Specifications

4 CAN I/O Support
4-26
(autosearch). This value makes sure that the xPC Target kernel automatically
finds the board independently of the PCI slot it is plugged into. If more than
one board is present in the target system the correct PCI slot number has to be
provided for each board. Use the xPC Target function ‘xpcgetpci’ to query the
target system for installed PCI boards and the PCI slots they are plugged into.
For more information see ‘help getxpcpci’.
The board allows activating proper termination for each of the two CAN ports
separately by means of DIP-switches at the rear panel of the board. Refer to the
Softing user manual on how the DIP-switches have to be set. Both CAN ports
have to be terminated properly when you use the provided loop-back model in
order to test the board and drivers.