Specifications

4 CAN I/O Support
4-24
The dialog box of the Setup block lets you define the following settings.
Board — The first control (popup menu) lets you define which board is being
accessed by this driver block instance. The board number (1…3) can be seen as
a reference identifier in order to differentiate the boards if multiple boards are
present in the target system. The physical board finally referenced by the
board number depends on the PCI Slot edit field described further below. If just
one board is present in the target system, board number 1 should be selected.
CAN 1 - Physical bus — The second control (popup menu) is used to define the
physical CAN bus type of CAN port 1. In the board standard hardware
configuration only Highspeed CAN is supported. By extending the board with
Lowspeed CAN piggyback modules it is possible to additionally select
Lowspeed CAN as the physical bus. The value of this control shouldn’t be