Specifications

CAN driver blocks for the CAN-AC2 (ISA) with Intel 82527 CAN-Controller
4-15
CAN driver blocks for the CAN-AC2 (ISA) with Intel 82527
CAN-Controller
The driver blocks described here support the CAN-AC2 (ISA) with piggyback
modules. The Intel 82527 chip is used as the CAN-controller in this
configuration and supports both Standard and Extended identifier ranges in
parallel. The driver block set for this board is found in the xPC Target I/O block
library in the group CAN/Softing.
The second block group highlighted above contains the three available CAN
blocks: Setup, Send, and Receive.