User`s guide

2 Importing and Exporting Video
10 Use the Compare to Constant1 and Compare to Constant2 blocks to send
frames 10 to 19 to the s econd AVI file. Set the Compare to C onstant1 block
parameters as follow s:
• Operator =
>=
• Constant value = 10
Set the Compare to C onstant2 block parameters as follows:
• Operator =
<
• Constant value = 20
11 UsetheComparetoConstant3blocktosendframes20to30tothethird
AV I file. Set the block parameters as follows:
• Operator =
>=
• Constant value = 20
12 Use the Compare to Constant4 block to stop the simulation when the video
reaches frame 30. Set the b lock param eters as follows:
• Operator =
==
• Constant value = 30
• Output data type mode = b oole an
13 Connecttheblockssothatyourmodelre sembles the one in the following
figure.
2-22