User`s guide

Pattern Matching
by single-p recision floating-point values, a value of 0 corresponds to black
and a value of 1 corresponds to wh ite.
13 Connect the blocks as shown in the following figure.
14 Set the con
figuration parameters. Open t he Configuration dialog box by
selecting
Configuration Parameters from the Simulation menu. Set
the param
eters a s follows:
• Solver pa
ne, Stop time =
inf
• Solver pa
ne, Type =
Fixed-step
• Solver pa
ne, Solver =
discrete (no continu ous states)
15 Run the simulation.
The video is displayed in the Video Viewer window and a rectangular
box appears around the cat sculpture. To view the video at its true size,
right-click the window and select Set D isplay To True Size.
8-7