User`s guide

7 Analysis and Enhancement
9 Use the Product block to scale the values back to the 0 to 100 range. Accept
the default parameters.
10 Use the Color Space Co nv ersion1 b lock to convert the values back to the
sR’G’B’ color space. Set the block parameters as follows:
• Conversion =
L*a*b* to sR'G'B'
• Image signal = Separate color signals
11 Use the Video Viewer blocks to view the origin al an d modified image s. For
each block, set the Im age signal parameter to
Separate color signals.
12 Connect the blocks as shown in the following figure.
13 Set the configuration parameters. Open the Configuration dialog box by
selecting Configuration Parameters from the Simulation menu. Set
the parameters as follows:
• Solver pane, Stop time =
0
• Solver pane, Type = Fixe d-st ep
• Solver pane, Solver = discr ete (no continuous states)
14 Run the mo
del.
7-56