User`s guide

Feature Extraction
9 Use the Find Local Maxima block to find the location of the m a ximum
value i n the H oug h matrix. Set the block parameters as follows:
• Maximum num ber of local maxima (N) =
1
• Select the Input is Hough matrix spanning full theta range check
box.
10 Use the Selector blocks to se parate the indices of the rho and theta values,
which are output at the Idx port, that are associated w ith the maximum
value in the Hough matrix. Set the Selector block parameters as follow s:
• Index mode =
Zero-based
7-13