User manual

38
Conversion from release 3.3.1 and 3.3.3 to 4.0 is embedded. Note however that some
additional actions might be required due to changed port names. Refer to the library
documentation for more information.
3.9.9 Hydro Power Library
A major version 2.4 has been released. The release contains two major improvements; a new
surge tank model with support for more complex geometries, and a reduction of the
simulation speed of approximately 50% due to a more efficient media implementation.
Models that are using Hydro Power Library version 2.3 will automatically be converted to
version 2.4.
3.9.10 Liquid Cooling Library
Version 1.2.1 of the Liquid Cooling Library is a minor release.
3.9.11 Model Management Library
A minor version 1.1.2 has been released.
3.9.12 Plot 3D Library
A minor version 1.0.3 has been released.
3.9.13 Pneumatics Library
A minor version 1.6.2 has been released.
3.9.14 Thermal Power Library
The version 1.8 is a major version, with a number of enhancements and improvements.
Some examples:
• New discretized gas pipe model ThermalPower.Gas.FlowChannels.Pipe. It can handle
reversing flow.
• New wall model with a more userfriendly generic structure.
• New gas and two-phase heat exchanger Generic_gas2ph. It´s parametrized by basic
geometry parameters.
• New radiation model.
• New generic gas friction loss model. The user can choose from a large variety of
pressure loss correlations; including quadratic, linear, loss coefficient based, etc.
Models that are using Thermal Power Library version 1.7 will automatically be converted to
Thermal Power 1.8.
3.9.15 User Interaction Library
A minor version 0.63 has been released.