User`s guide

3 Embedded Target for TI C6000 DSP 1.0 Release Notes
3-8
Upgrading from an Earlier Release
This section describes the upgrade issues involved in moving from the
Developer’s Kit for Texas Instruments ™ DSP 1.2 to Embedded Target for TI
C6000 DSP Version 1.0.
Note The Developer’s Kit for Texas Instruments™ DSP has been repackaged
as two separate products, including the Embedded Target for TI C6000 DSP
and the MATLAB Link for Code Composer Studio.
To upgrade your current Developer’s Kit to Embedded Target for TI C6000 DSP
Version 1.0, do the following tasks in order:
• Install the appropriate version of Texas Instruments Code Composer
Studio 2.1. Note that the Embedded Target does not support targeting with
the C5000 DSP family.
- To target C6000 hardware, install the Code Composer Studio Version 2.1
for TMS320C6000.
- To link to C6000 hardware, install the Code Composer Studio Version 2.1
for TMS320C6000.
• Download and apply a patch for DSP/BIOS—”CCStudio v2.1 - Config Server
Registration Fix”—to Code Composer Studio 2.1. The patch is available only
from the following URL:
https://www-a.ti.com/downloads/sds_support/
ALL-2.00-SA-to-TI-BIOSRTA-REG01.htm
• Install MATLAB Link for Code Composer Studio™ Development Tools 1.0
• Install Embedded Target for TI C6000 DSP Version 1.0