User`s guide

Installing Embedded Target for TI C6000 DSP
2-7
- To target C6000 hardware, install the Code Composer Studio Version 2.12
for TMS320C6000.
Install the Required MathWorks Products
To install Version 1.1 of Embedded Target for TI C6000 DSP, you must install
the required MathWorks products that support it.
1 Install MATLAB 6.5.1, Real-Time Workshop 5.1, Simulink 5.1, Signal
Processing Toolbox 6.1, and DSP Blockset 5.1. Refer to your MATLAB
installation instructions for more information about installing this software.
2 Install MATLAB Link for Code Composer Studio
®
Development Tools 1.1.
Install Embedded Target for TI C6000 DSP Version 1.1
Now you can install the Embedded Target for TI C6000 DSP 1.1 from the
MATLAB installer.
If you are upgrading from a version earlier than 1.1, refer to “Upgrading from
an Earlier Release” on page 3-8.