Installation guide

Creating Advanced Configurations
Setting up a Redundant Installation
Perform these steps to configure a redundant installation:
1 Choose the systems that you intend to use as servers. When choosing
servers, keep in mind the following:
• The servers should be able to handle the network traffic associated with
license management. A primary server must be chosen. This is the
system to which clients connect first and which receives the majority of
the network traffic. The primary server is the first server listed in the
License File. If this system fails, the next server listed in the License
File becomes primary.
•
The servers should be running supported versions of their operating
systems.
2 Request a License File from The MathWorks.
Once you have chosen the servers, determine the host IDs of each server
and provide them to The MathWorks when you request your License File.
The MathWorks will generate an appropriate License File. The followdng
example shows a License File that supports redundant servers. Note that
the License File lists three Host IDs.
# BEGIN cut here CUT HERE BEGIN
# MATLAB license passcode file.
# LicenseNo: 123 HostID: 00034660893e
# HostID: 000533278656
# HostID: 004706358836
INCREMENT TMW_Archiv6 MLM 16 01-jan-0000 0 \
CD74754B9E91B8036 VEND0R_STRING=87 H0STID=DEM0 SN=123
INCREMENT MATLAB MLM 16 Ol-jan-OOOO 5 \
8D1B1BE24413B8126 H0STID=ID=123 DUP_GROUP=UH SN=123
INCREMENT SIMULINK MLM 16 01-jan-OOOO 5 \
2D031C43289BE055B H0STID=ID=123 DUP_GROUP=UH SN=123
INCREMENT Control_Toolbox MLM 16 01-jan-OOOO 5 \
0F441940A6E1648FE H0STID=ID=123 DUP_GROUP=UH SN=123
INCREMENT Signal_Toolbox MLM 16 01-jan-OOOO 5 \
2D245A439FEEA2336 H0STID=ID=123 DUP_GROUP=UH SN=123
# END- cut here CUT HERE END
3-25