Installation guide

Creating Advanced Configurations
Creating Advanced Configurations
Using the MathWorks Installer, you can set up a network installation with
little knowledge of license management. Follow the instructions in Chapter
2, "Network Installation Procedure" However, there are configurations that
require some additional setup, including
• "Running Multiple Versions of MATLAB" on page 3-21
• "Using Products in a Concurrent Installation from a Stand-Alone
Installation" on page 3-22
• "Running MATLAB with Other FLEXnet Applications" on page 3-24
• "Configuring Redundant License Servers" on page 3-24
Running Multiple Versions of MATLAB
You can run multiple versions of MATLAB on the same system without any
special considerations in stand-alone, individual license configurations. In
remote access configurations, described in "Network Configuration Options"
on page 2-2, you must perform some additional set up on your license server
and possibly on client systems to provide users with access to multiple
versions of MATLAB over the network.
Required Setup on Your License Server
To make multiple versions of MATLAB available in a remote access
configuration, follow this procedure on your license server:
1 Check the version of your currently installed MATLAB. You must be
running MATLAB Version 5.2.x or later to be able to run multiple versions.
2 Stop the license manager. (See "Starting and Stopping the License
Manager" on page 3-15.)
3 Remove the license manager service. (See "Removing the License Manager
Service" on page 3-15.)
4 Install the license manager included with the current version of MATLAB
on your license server. Run the installer and select the license manager in
the product list. (See "Step 7: Specify Installation Folder" on page 2-15.)
3-21