Installation guide

2 Neh/vork Installation Procedure
Installing MATLAB on a Client System
This section describes how to install MATLAB on a client system running
Windows in a local client access configuration. See "Local Client Access
Configuration" on page 2-4 for information about this type of installation.
The installation procedure on a client system is almost identical to the
procedure on a server; however, there are some differences. For example,
in a client installation, you do not install the license manager. This table
lists all the steps in the network installation procedure and notes where they
are different on client systems. For more detailed information about any of
the steps, go to the description of the step in "Overview of Steps in Network
Installation Procedure" on page 2-5.
Basic Network Installation Procedure
"Step 1: Before You Install" on page 2-6
"Step 2: Start the Installer" on page 2-8
"Step 3: Enter Identification and License
Information" on page 2-9
"Step 4: Specify Location of License File" on
page 2-11
"Step 5: Review the Software Licensing
Agreement" on page 2-12
"Step 6: Specify Type of Installation" on page
2-13
"Step 7: Specify Installation Folder" on page
2-15
"Step 8: Specify Products to Install" on page
2-15
client installation Notes : ;:
You do not have to stop the license manager.
Same as on a license server.
Use the PLP that you used for your license server
installation.
Specify the location of the License File that was
processed by the installer during the license
manager installation on the license server. See
"License File Location" on page 2-29 for more
information.
Same as on a license server
You can select either Typical or Custom.
Choose Custom to specify which products you
want to install.
Same as on a license server.
Do not select the license manager in the product
list. You do not need to install the license
manager on client systems.
2-28