Installation guide

2 Nehvork Installation Procedure
Step 12: Read Product Configuration Notes
Depending upon which products you install, the MathWorks Installer might
display a dialog box containing two types of information:
• Product contiguration information — Certain products require
additional configuration. If you installed one of these products, the
installer lists the configuration commands in this dialog box. You can
copy this command to your system clipboard for use after the installation
is completed. See "Configuring Certain Products" on page 1-21 for more
information.
• Available product updates — If your PLP identifies products that
are not on any of the CDs, and you are not currently connected to the
Internet or you chose not to download product updates, the installer lists
them in this dialog box. After installation is complete, you must go to the
MathWorks Web site to download them.
•) Prortuct" ronfrgural"ion Notes
Vour instaOatton may require additional configuration steps. See the notes beiow for
instructions:
• ) Tlx'.M.iihWVrks
1.The license managerfiles have been installed in the fiexim folder, but have not been
installed as a senrice on your machine. Before running MATLAB, you will need to
configure and start the license manager using lmstools.exe found in the flexim folder.
For more information see the Installation Guide for Windows.
'.k I |r~Next* ll
T 11 -.. i<
Help
Click Next.
2-22