Installation guide

1 Standard Installation Procedure
installing Additional Products
When you order additional products. The MathWorks sends you a new
Personal License Password (PLP). You must use this new PLP when you
install your new products.
This section briefly outlines the procedure to install an additional product.
For more detailed information about any step, see "Overview of Steps in
Standard Installation Procedure" on page 1-2.
1 Before you install:
• Have your new PLP handy.
• Exit any existing copies of MATLAB you might have running.
2 Insert the MathWorks CD 1 into your CD-ROM drive or double-click the
file you downloaded from the MathWorks Web site. The installer starts
automatically, displajdng the Welcome to the MathWorks Installer dialog
box. Select the Install option and click Next.
3 Enter your new Personal License Password (PLP) in the License
Information dialog box and click Next.
4 Review the software licensing agreement and, if you agree with the terms,
select Yes and click Next.
5 Select the Custom option on the Installation Type dialog box. If you want
to install only your new products, you must choose the Custom option
because it enables you to select which products you want to install. Click
Next to continue.
6 Specify the location of your existing MATLAB installation in the Folder
Selection dialog box. By default, the MathWorks Installer lists all the
products you are licensed to install and preselects them for installation.
To only install the new products, clear the check boxes next to the names
ofthe products that you do not want to install.
1-26