Installation guide

1 Standard Installation Procedure
Overview of Steps in Standard Installation Procedure
The following table summarizes the steps required to install MathWorks
products on your computer. The sections that follow provide more detailed
information about each step. If you encounter any problems during
installation, see Chapter 4, "Troubleshooting" for possible solutions.
Instead of performing this procedure and answering the questions posed by
each dialog box, you can run the installer noninteractively. In this mode, all
the information that you would normally provide using the installer dialog
boxes you enter in an installer initialization file. For more information, see
"Running the Installer Noninteractively" on page 3-28.
1-2
Instaiidtion Steps
Step 1: Before you install
Step 2: Start the installer
Step 3: Enter identification and license information
Step 4: Review the software licensing agreement
Step 5: Choose the installation type (Typical or Custom)
Step 6: Specify installation folder
Step 7: Specify the products to install (Custom installations only)
Step 8: Specify installation options (Custom installations only)
Step 9: Confirm your choices
Step 10: Read product configuration notes
Step 11: Complete the installation
Step 12: After you install