User`s guide

Move Internally Stored Requirements Links to External Storage
3-7
Move Internally Stored Requirements Links to External Storage
If you have a model with requirements links that are stored with the model, you can
move those links to an external file. When you move internally stored links to a file, the
RMI deleted the internally stored links from the model file and saves the model. From
this point on, the data exists only in the external file.
1
Open the model that contains internally stored requirements links.
2
Select Analysis > Requirements Traceability > Move to File.
The Select a file to store RMI data dialog box prompts you to save the file with the
default name model_name.req.
3
Accept the default name, or enter a different file name if required.
4
Click Save.
Note: Use the default name for externally stored requirements. For more
information about this recommendation, see “Guidelines for External Storage of
Requirements Links” on page 3-3.