User`s guide

3 How Is Requirements Link Information Stored?
3-4
Specify Storage for Requirements Links
By default, the Requirements Management Interface (RMI) stores requirements links
with the model file. In the Requirements Settings dialog box, on the Storage tab, you
can enable external storage or reenable internal storage. This setting goes into effect
immediately and applies to all new models and to existing models with no links to
requirements.
If you open a model that already has requirements links, the RMI uses the storage
mechanism you used previously with that model, regardless of what your default storage
setting is.
To specify the requirements storage setting:
1
In the model window, select Analysis > Requirements Traceability > Settings.
2
In the Requirements Settings dialog box, select the Storage tab.
3
Under Default storage location for requirements links data:
• To enable internal storage, select Store internally (embedded in model file).
• To enable external storage, select Store externally (in a separate *.req file).
These settings go into effect immediately.