User`s guide

Link Signal Builder Blocks to Model Objects
2-57
10
Click Apply to create the link.
11
In the model window, select the User Inputs block, right-click, and select
Requirements Traceability.
The link to the new requirement is the option at the top of the submenu.
12
To verify that the links were created, in the sf_car model window, select Analysis
> Requirements Traceability > Highlight Model.
The blocks with requirements links are highlighted.
Note: Links that you create in this way associate requirements information with
individual signal groups, not with the entire Signal Builder block.
13
Close the sf_car model.