User`s guide

2 Links Between Models and Requirements
2-54
Link Signal Builder Blocks to Requirements Documents
You can create links from a signal group in a Signal Builder block to a requirements
document:
1
Open the model:
sf_car
2
In the sf_car model window, double-click the User Inputs block.
The Signal Builder dialog box opens, displaying four groups of signals. The Passing
Maneuver signal group is the current active group. The RMI associates any
requirements links that you add to the current active signal group.
3
At the far-right end of the toolbar, click the Show verification settings button .
(You might need to expand the Signal Builder dialog box for this button to become
visible.)
A Requirements pane opens on the right-hand side of the Signal Builder dialog
box.
4
Place your cursor in the window, right-click, and select Open Link Editor.
The Requirements Traceability Link Editor opens.
5
Click New. In the Description field, enter User input requirements.
6
When you browse and select a requirements document, the RMI stores the document
path as specified by the Document file reference option on the Requirements
Settings dialog box, Selection Linking tab.
For information about which setting to use for your working environment, see
“Document Path Storage” on page 5-15.
7
Browse to a requirements document and click Open.
8
In the Location drop-down list, select Search text to link to specified text in the
document.