User`s guide

Create Check for Model Configuration Parameters

25-25

<parameter>SolverType</parameter>

<value>Fixed-step</value>

<fixvalue>Fixed-step</value>

</PostitiveModelParameterConstraint>

Data file tagging specifying unwanted configuration parameter

The following tagging specifies a subcheck for configuration parameter SolverType. The

subcheck does not pass if the configuration parameter is set to Fixed-Step.

<parameter>SolverType</parameter>

<value>Fixed-step</value>

</NegativeModelParameterConstraint>

Data file tagging specifying unwanted configuration parameter with fix action

The following tagging specifies a subcheck for configuration parameter SolverType. If

the configuration parameter is set to Fixed-Step, the subcheck does not pass . If the

subcheck does not pass, the check fix action modifies the configuration parameter to

Variable-Step.

<parameter>SolverType</parameter>

<value>Fixed-step</value>

<fixvalue>Variable-step</value>

</NegativeModelParameterConstraint>

Data file tagging specifying unwanted configuration parameter with fix action and prerequisite

check

The following tagging specifies a check for configuration parameter SolverType.

The subcheck for SolverType runs only after the ID_B subcheck passes. If theID_B

subcheck does not pass, the subcheck for SolverType does not run. The Model Advisor

reports that the prerequisite constraint is not met.

If the SolverType subcheck runs and SolverType is set to Fixed-Step, the subcheck

does not pass. The check fix action modifies the configuration parameter to Variable-

Step.

<parameter>SolverType</parameter>

<value>Fixed-step</value>