User`s guide

Quick Start Examples
25-9
3
It the Command Window, enter:
sl_refresh_customizations
4
From the MATLAB window, select New > Model to open a new Simulink model
window.
5
In the Simulink model window, create two Constant blocks named Const_One and
Const_1:
• Right-click the Const_One block, choose Constant Parameters, and assign a
Constant value of one.
• Right-click the Const_1 block, choose Constant Parameters, and assign a
Constant value of 1.
• Save your model as example2_qs
6
From the model window, select Analysis > Model Advisor > Model Advisor to
open the Model Advisor.
7
A System Selector — Model Advisor dialog box opens. Click OK. The Model
Advisor window opens. It might take a few minutes.
8
If the By Product folder is not displayed in the Model Advisor window, select Show
By Product Folder from the Settings > Preferences dialog box.
9
In the left pane, click By Product > Demo > Check Constant block usage.
10
Click Run This Check. The Model Advisor check fails for the Const_1 block and
displays a Recommended Action to parametrize the constant block.