User`s guide

Limit Model Checks
22-7
2
In the Model Advisor window, click the Enable highlighting toggle button ( ).
3
In the left pane of the Model Advisor window, select a check. The blocks excluded
from the check appear in the model window, highlighted in gray with a black
border.
After the Model Advisor completes an analysis, you can view exclusion information for
individual checks in the:
• HTML report. In the Model Advisor window, make sure select the Show report
after run check box before the analysis.
• Model Advisor window. In the left pane of the Model Advisor window, select By
Product > Simulink > < name of check >. If the By Product folder is not
displayed, select Show By Product Folder from the Settings > Preferences dialog
box.
If the check ... The HTML report and Model Advisor window ...
Has no exclusions rules
applied.
State that no exclusions were applied to this check. This
might happen if you exclude a block from a check that passes
without an exclusion.
Does not support
exclusions.
State that the check does not support exclusions. This might
happen if you exclude a block from a check that does not
support exclusions.
Is excluded from a block. Lists the check exclusion rules.
Manage Exclusions
• “Save Exclusions To a File” on page 22-8
• “Load an Exclusion File” on page 22-9
• “Detach an Exclusion File” on page 22-9
• “Remove an Exclusion” on page 22-9
• “Add a Rational to an Exclusion” on page 22-9
• “Programmatically Specify an Exclusion File” on page 22-9
To open the Model Advisor Exclusion Editor dialog box, either right-click in the model
window or right-click a block and select Model Advisor > Open Model Advisor
Exclusion Editor.