User`s guide

22 Checking Systems Interactively
22-4
To exclude blocks from specified checks during an analysis of your model, you first create
exclusions and save them in an exclusion file. You can also use an existing Model Advisor
exclusion file.
When you analyze a model with Model Advisor exclusions, the blocks in the exclusion file
are excluded from the specified checks during the analysis. You can use an exclusion file
with several models. However, a model can have only one exclusion file.
Unless you specify a different folder, the Model Advisor saves exclusion
files in the current folder. The default name for an exclusion file is
<model_name>_exclusions.xml.
If you create an exclusion file and save your model, you attach the exclusion file to
your model. Each time that you open the model, the blocks and checks specified in the
exclusion file are excluded from the analysis.
In the Model Advisor Exclusion Editor dialog box, you can view each exclusion. Each
exclusion includes the information listed in the following table.
Field Description
Rationale A description of why this object is excluded from Model
Advisor checks.
Type Whether a specific block is excluded or all blocks of a given
type are excluded.
Value Name of block or blocks that are excluded.
Check ID (s) Names of checks for which the block exclusion applies.
Create Model Advisor Exclusions
You might want to exclude model blocks and checks from a Model Advisor analysis
to save time during model development and verification. To create a Model Advisor
exclusion:
1
In the model window, right-click a block and select Model Advisor. The following
table lists the possible menu options. The following table lists what you can exclude
and the corresponding menu options.