User`s guide

Limit Model Checks
22-3
Limit Model Checks
In this section...
“What Is a Model Advisor Exclusion?” on page 22-3
“Model Advisor Exclusion Files” on page 22-3
“Create Model Advisor Exclusions” on page 22-4
“Review Model Advisor Exclusions” on page 22-6
“Manage Exclusions” on page 22-7
What Is a Model Advisor Exclusion?
To save time during model development and verification, you might decide to limit the
scope of a Model Advisor analysis of your model. You can do this by excluding individual
blocks from checks. You create a Model Advisor exclusion to exclude blocks in the model
from selected checks. You can exclude all or selected checks from:
• Simulink blocks
• Stateflow charts
After you specify the blocks to exclude, when you use the Model Advisor to analyze your
model, the software uses the exclusion information to exclude blocks from specified
checks during the analysis. A Model Advisor exclusion file stores the block and check
exclusion information.
You can also exclude blocks from checks that you write by using Model Advisor APIs. For
more information, see “Exclude Blocks From Custom Checks”.
Note: If you “Comment Blocks”, they are excluded from both simulation and Model
Advisor analysis.
Model Advisor Exclusion Files
A Model Advisor exclusion file specifies a collection of blocks to exclude from specified
checks during a Model Advisor analysis.