User`s guide

Create, Edit, and View Coverage Filter Rules
20-5
Create, Edit, and View Coverage Filter Rules
In this section...
“Create and Edit Coverage Filter Rules” on page 20-5
“Save Coverage Filter to File” on page 20-8
“Attach Coverage Filter File to Model” on page 20-8
“View Coverage Filter Rules in Your Model” on page 20-8
“Remove Coverage Filter Rules” on page 20-9
Create and Edit Coverage Filter Rules
• “Create a Coverage Filter Rule” on page 20-5
• “Add Rationale to a Coverage Filter Rule” on page 20-6
• “Create Additional Coverage Filter Rules” on page 20-7
Create a Coverage Filter Rule
To create a coverage filter rule:
1
In the Coverage Settings dialog box, enable model coverage.
2
In the model window, right-click a model object and select Coverage > Exclude.
The following table lists the Exclude menu options. Depending on which option you
select, the Type field is automatically set for the coverage filter rule you selected; you
cannot override the value in the Type field.
If you select Coverage > ... The rule type is ...
Exclude this block by block path
Exclude all blocks with type <block_type> by block type
Exclude all blocks with type MATLAB
Function
by block type
Exclude all blocks with type Truth Table by block type
Exclude subsystem with all dependents by subsystem