User`s guide

2 Links Between Models and Requirements
2-16
Requirements Settings
You can manage your RMI preferences in the Requirements Settings dialog box.
These settings are global and not associated with any particular model. To open
the Requirements Settings dialog box, from the Simulink Editor, select Analysis >
Requirements Traceability > Settings. In this dialog box, you can select the:
• Storage tab to set the default way in which the RMI stores requirements links in a
model. For storage information, see “Specify Storage for Requirements Links”.
• Selection Linking tab to set the options for linking to the active selection in a
supported document. For setting information, see “Selection Linking Tab”.
• Filters tab to set the options for filtering requirements in a model. For filtering
information, see “Configure Requirements Filtering”.
• Report tab to customize the requirements report without using the Report
Generator. For setting information, see “Customize Requirements Report Using the
RMI Settings”.
Selection Linking Tab
In the Requirements Settings dialog box, on the Selection Linking tab, are the
following options for linking to the active selection in a supported document. To open the
Requirements Settings dialog box, select Analysis > Requirements Traceability >
Settings.
Options Description
For linking to the active selection within an external document:
Enabled applications Enable selection-based linking shortcuts to
Microsoft Word, Microsoft Excel, or DOORS
applications.
Document file reference Select type of file reference. For
information on what settings to use, see
“Document Path Storage” on page 5-15.
Apply this user tag to new links Enter text to attach to the links you create.
For more information about user tags, see
“Filter Requirements with User Tags” on
page 4-25
When creating selection-based links: