User`s guide

Model Coverage for Multiple Instances of a Referenced Model
18-11
This model contains three Model blocks that reference the
sldemo_mdlref_counter_datamngt example model. The corners of each Model
block indicate the value of their Simulation mode parameter:
• Counter1 — Simulation mode: Normal
• Counter2 — Simulation mode: Accelerator
• Counter3 — Simulation mode: Accelerator
2
Configure your model to record coverage during simulation:
a
In the model window, select Analysis > Coverage > Settings.
b
On the Coverage tab, select:
• Coverage for this model
• Coverage for referenced models
c
Under Coverage for referenced models, click Select Models. In the Select
Models for Coverage Analysis dialog box, you can select only those referenced