User`s guide

17 Setting Model Coverage Options
17-2
Specify Model Coverage Options
Before starting a model coverage analysis, you must specify several model coverage
recording and reporting options. In the Simulink Editor, select Analysis > Coverage >
Settings. The Coverage Settings dialog box opens, with the Coverage tab displayed.
The following sections describe the settings for each tab in the Coverage Settings dialog
box.
In this section...
“Coverage Tab” on page 17-2
“Results Tab” on page 17-6
“Reporting Tab” on page 17-8
“Options Tab” on page 17-12
“Filter Tab” on page 17-14
Coverage Tab
On the Coverage tab, select the model coverages calculated during simulation.