User`s guide

9 Custom Types of Requirements Documents
9-16
negative of the user setting.
End of "Glide Slope Coupled"
5
Open the following example model:
aero_dap3dof
6
Right-click the Reaction Jet Control subsystem and select Requirements
Traceability > Open Link Editor.
The Requirements Traceability Link Editor opens.
7
Click New to add a new requirement link. The Document type drop-down list now
contains the ABC file (for demonstration) option.
8
Set Document type to ABC file (for demonstration) and browse to the
matlabroot\toolbox\slvnv\rmidemos\demo_req_1.abc file. The browser
shows only the files with the .abc extension.
9
To define a particular location in the requirements document, use the Location
field.
In this example, the rmicustabcinterface function specifies two types of location
delimiters for your requirements:
• > — Line number in a file
• @ — Named item, such as a bookmark, function, or HTML anchor