User`s guide

Customize DOORS Synchronization
6-11
4
Click Continue to create a new surrogate module with the new path or name.
Customize the Level of Detail in Synchronization
You can customize the level of detail in a surrogate module so that the module reflects
the full or partial Simulink model hierarchy.
In “Synchronize a Simulink Model to Create a Surrogate Module” on page 6-5, you
synchronized the model with the Extra mapping additionally to objects with links
option set to None. As a result, the surrogate module contains only Simulink objects that
have requirement links, and their parent objects. Additional synchronization options,
described in this section, can increase the level of surrogate detail. Increasing the level of
surrogate detail can slow down synchronization.
The Extra mapping additionally to objects with links option can have one of
the following values. Each subsequent option adds additional Simulink objects to the
surrogate module. You choose None to minimize the surrogate size or Complete to create
a full representation of your model. The Complete option adds all Simulink objects
to the surrogate module, creating a one-to-one mapping of the Simulink model in the
surrogate module. The intermediate options provide more levels of detail.
Drop-Down List Option Description
None (Recommended for better
performance)
Maps only Simulink objects that have requirements links
and their parent objects to the surrogate module.
Minimal - Non-empty unmasked
subsystems and Stateflow
charts
Adds all nonempty Stateflow charts and unmasked
Simulink subsystems to the surrogate module.