User`s guide

Filter Requirements with User Tags
4-27
4
In the User tag field, enter one or more keywords, separated by commas, that the
RMI can use to filter requirements. In this example, after design, enter a comma,
followed by the user tag test to specify a second user tag for this requirement.
User tags:
• Are not case sensitive.
• Can consist of multiple words. For example, if you enter design requirement,
the entire phrase constitutes the user tag. Separate user tags with commas.
5
Click Apply or OK to save the changes.
Filter, Highlight, and Report with User Tags
The slvnvdemo_fuelsys_officereq model includes several requirements with the
user tag design. This section describes how to highlight only those model objects that
have the user tag, test.
1
In the Simulink Editor, remove highlighting from the
slvnvdemo_fuelsys_officereq model by selecting Analysis > Requirements
Traceability > Unhighlight model.
2
Select Analysis > Requirements Traceability > Settings.
3
In the Requirements Settings dialog box, click the Filters tab.