User`s guide

Filter Requirements with User Tags
4-25
Filter Requirements with User Tags
In this section...
“User Tags and Requirements Filtering” on page 4-25
“Apply a User Tag to a Requirement” on page 4-25
“Filter, Highlight, and Report with User Tags” on page 4-27
“Apply User Tags During Selection-Based Linking” on page 4-29
“Configure Requirements Filtering” on page 4-31
User Tags and Requirements Filtering
User tags are user-defined keywords that you associate with specific requirements. With
user tags, you can highlight a model or generate a requirements report for a model in the
following ways:
• Highlight or report only those requirements that have a specific user tag.
• Highlight or report only those requirements that have one of several user tags.
• Do not highlight and report requirements that have a specific user tag.
Apply a User Tag to a Requirement
To apply one or more user tags to a newly created requirement:
1
Open the example model:
slvnvdemo_fuelsys_officereq
2
Open the fuel rate controller subsystem.
3
To open the requirements document, right-click the Airflow calculation subsystem
and select Requirements Traceability > Open Link Editor.
The Requirements Traceability Link Editor opens with the details about the
requirement that you created.