Operating instructions

5
Related Manuals
The following manuals are related to the NJ-series Controllers. Use these manuals for reference.
Manual name Cat. No. Model numbers Application Description
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC-SE2□□□ Learning about the operating
procedures and functions of the
Sysmac Studio.
The operating procedures of the Sysmac
Studio are described.
NJ-series CPU Unit Hardware
User’s Manual
W500 NJ501-□□□□
NJ301-□□□□
Learning the basic specifications
of the NJ-series CPU Units,
including introductory information,
designing, installation, and
maintenance.
Mainly hardware information is
provided.
An introduction to the entire NJ-series
system is provided along with the following
information on a Controller built with an
NJ501 CPU Unit.
・Features and system configuration
・Introduction ・Part names and functions
・General specifications ・Installation and
wiring
・Maintenance and inspection
Use this manual together with the
NJ-series CPU Unit Software User’s
Manual (Cat. No. W501).
NJ-series CPU Unit Software
User’s Manual
W501 NJ501-□□□□
NJ301-□□□□
Learning how to program
and set up an NJ-series CPU Unit.
Mainly software information is
provided.
The following information is provided on a
Controller built with an NJ-series CPU Unit.
・CPU Unit operation
・CPU Unit features
・Initial settings
・Programming based on IEC 61131-3
language specifications
Use this manual together with the
NJ-series CPU Unit Hardware User’s
Manual (Cat. No.W500).
NJ-series CPU Unit Motion
Control USER'S MANUAL
W507 NJ501-□□□□
NJ301-□□□□
Learning about motion control
settings and programming
concepts.
The settings and operation of the CPU Unit
and programming concepts for motion
control are described. Use this manual
together with the NJ-series CPU Unit
Hardware User’s Manual (Cat. No. W500)
and NJ-series CPU Unit Software User’s
Manual (Cat. No. W501).