User`s guide

Virtual World Connection to a Model
3-9
A VRML tree appears on the right side. The Simulink software associates a new
virtual world with the model.
5
On the left of the Plane (Transform) node, click the + square.
The Plane Transform tree expands. Now you can see what characteristics of the
plane you can drive from the Simulink interface. This model computes the position.
6
In the Plane Transform tree, select the translation field check box. Clear the
rotation field check box. Click OK.
The VR Sink block is updated and changes to just one input, the Plane translation.
The Virtual Reality block is ready to use with the new parameters defined.
7
Verify that the correct output is connected to your VR Sink block. The output from
the VR Signal Expander should be connected to the single input.
8
In the Simulink 3D Animation Viewer, from the Simulation menu, run the
simulation again and observe the simulation.