User`s guide

set
10-51
Navigation mode, specified as 'examine', 'fly', 'walk', or 'none'. See “Mouse
Navigation”.
'NavPanel' — Navigation panel appearance
'none' (default) | 'halfbar' | 'bar' | 'opaque' | 'translucent'
Navigation panel appearance, specified as 'none', 'halfbar', 'bar', 'opaque', or
'translucent'.
'Navspeed' — Navigation speed
'normal' (default) | 'slow' | 'veryslow' | 'fast' | 'veryfast'
Navigation speed, specified as 'normal', 'slow', 'veryslow', 'fast', or
'veryfast'.
'NavZones' — Navigation zones display
'off' (default) | 'on'
Navigation zones display, specified as 'on' or 'off'.
'Position' — Figure location and size
vector with four doubles
Location and size of virtual figure, specified as the vector in the form [left bottom
width height]. Specify measurements in pixels.
Element Description
left Distance from the left edge of the primary display to
the inner left edge of the figure window. You can specify
a negative value on systems that have more than one
monitor.
bottom Distance from the bottom edge of the primary display
to the inner bottom edge of the figure window. You can
specify a negative value on systems that have more than
one monitor.
width Distance between the right and left inner edges of the
figure.
height Distance between the top and bottom inner edges of the
figure.
All measurements are in units specified in pixels.