User`s guide

9 Blocks — Alphabetical List
9-4
Block Parameters Dialog Box
Joystick ID — The system ID assigned to the given joystick device. You can find the
properties of the joystick that is connected to the system in the Game Controllers section
of the system Control Panel.
Adjust I/O ports according to joystick capabilities — If you select this check box,
the Simulink 3D Animation software dynamically adjusts the ports to correspond to
the capabilities of the connected joystick each time that you open the model. If the
connected device does not have force-feedback capability, selecting this check box causes
the removal of the force-feedback input from the block, even if you select the Enable
force-feedback input check box. The block ports do not have the full widths provided
by the Windows Game Controllers interface.
Enable force-feedback input — If you select this check box, the Simulink 3D
Animation software can support force-feedback joystick, steering wheel, and haptic (one
that enables tactile feedback) devices.
Output Ports — Depending on the Adjust I/O ports according to joystick
capabilities check box setting, the output ports change to correspond to the actual
capabilities of the connected joystick. Or, on Windows platforms, the output ports have
fixed maximum width provided by the system Game Controllers interface.