User`s guide

Creating Signals
3-35
output check box selected, and the fourth block (DSP Constant3) has the
Interpret vector parameters as 1-D check box selected.
In addition to the various output dimensions in the model, you can observe
three different kinds of signals:
•Sample-based matrix signal – The DSP Constant and DSP Constant1 blocks
generate sample-based matrices (2-by-3 and 3-by-2, respectively) because
the
Frame-based output check box in those blocks is not selected. The
sample-based matrices can each be considered to each have six independent
channels.
•Frame-based matrix signal – The DSP Constant2 and DSP Constant4 blocks
generate frame-based matrices (2-by-3 and 3-by-1, respectively, and
represented by double lines) because the
Frame-based output check box in
those blocks is selected. The 2-by-3 frame-based matrix is considered to have
three independent channels, each containing two consecutive samples. The
3-by-1 frame-based matrix (column vector) is considered to have one
independent channel, containing three consecutive samples.
•1-D vector signal – The DSP Constant3 block generates a length-3 1-D vector
signal because the
Interpret vector parameters as 1-D check box in that
Sample-based matrix
(6 channels)
Sample-based matrix
(6 channels)
Frame-based matrix
(3 channels)
1-D vector
Frame-based matrix
(1 channel)