User`s guide

Vector Scope
5-519
For example, a five-channel signal would ordinarily generate all five plots with
a solid line style. To instead plot each line with a different style, enter
These settings plot the signal channels with the following styles.
Note that the first (leftmost) list item,
'-', corresponds to the first signal
channel (leftmost column of the input matrix). See
LineStyle property of the
line function in the MATLAB documentation for more information about the
style syntax. To specify a marker for the individual sample points, use the
Line
markers
parameter, described below.
The
Line markers parameter specifies the marker style with which each
channel’s samples are represented on the scope. The syntax specifies the
channels’ marker styles in list form, with each list entry specifying a marker
for the corresponding channel’s data. The list entries are separated by the pipe
symbol, |.
For example, a five-channel signal would ordinarily generate all five plots with
no marker symbol (i.e., the individual sample points are not marked on the
scope). To instead plot each line with a different marker style, you could enter
Line Style Appearance
Solid
Dashed
Dotted
Dash-dot
Solid
➄➃➂➁➀
- | -- | : | -. | -
➄➃➂➁➀
* | . | x | s | d