User`s guide

Downsample
5-146
panel of the Simulation Parameters dialog box, and select MultiTasking from
the
Mode parameter. Additionally, set the Stop time to 30.
Run the model and look at the output,
yout. The first few samples of each
channel are shown below.
yout =
11 -11
12 -12
13 -13
14 -14
2 -2
4 -4
6 -6
8 -8
10 -10
12 -12
14 -14
Since we ran this frame-based multirate model in multitasking mode, the first
row of the initial condition matrix appears as the first output sample, followed
by the other three initial condition rows. The second row of the first input
matrix (i.e., row D+1, where D is the
Sample offset) appears in the output as
sample 5 (i.e., sample M
i
+1, where M
i
is the input frame size).
Dialog Box