User`s guide

Counter

5-110

Initial count

The counter’s initial value at the start of the simulation and after reset.

Tunable, except in Simulink’s external mode.

Output

Selects the output port(s) to enable:

Cnt, Hit, or both.

Hit value

The scalar value whose occurrence in the count should be flagged by a

1 at

the (optional)

Hit output. This parameter is available when Hit or Count

and Hit

are selected in the Output menu. Tunable, except in Simulink’s

external mode.

Reset input

Enables the

Rst input port when selected.

Samples per output frame

The number of samples, M, in each output frame. This parameter is

available when

Free running is selected in the Count event menu.

Sample time

The output sample period, T

, in free-running mode. This parameter is

available when

Free running is selected in the Count event menu.

Supported

Data Types