User`s guide

3 Working with Real-Time Workshop
3-42
8 From the File menu, choose Save As. Save the model as ext_example.mdl.
Part 2: Building the Target Executable
In this section, you set up the model and code generation parameters required
for an external mode compatible target program. Then you generate code and
build the target executable:
1 Open the Configuration Parameters dialog from the Simulation menu.
Click the
Solver tab, set the Solver options Type to Fixed-step, and
select the
discrete (no continuous states) solver algorithm. Set Fixed
step size
to 0.01. Leave the other parameters at their default values. The
dialog appears below; note that after you click
Apply, the controls you
changed will again have a white background color.