User`s guide

4 External Mode
4-12
External Signal & Triggering
Pressing the Signal & Triggering button activates the External Signal &
Triggering
dialog box.
This windows provides support for:
• Signal selection — specify which Scope blocks are active in external mode
• Trigger selection — select the signal that defines when to display data in
Scope blocks.
• Trigger options — configure how and when to display data in Scope blocks
Signal Selection. External mode currently supports Scope blocks for signal
selection. Any Scope block in your model will appear in the
External Signal &
Triggering
dialog box in the Signal selection list. The Select all and Clear all
buttons toggle between selecting and deselecting all listed signals. A signal is
selected if an “X” appears to the left of the block’s name. Also, when a signal is
selected, the radio button (on and off) is activated if you click on the block’s
name with your mouse. Alternatively, you can double-click a signal to toggle
between selection and deselection.