Technical data

A
model.rtw
A-22
Value [–0.25, 0, –0.75]
String "[–.25 0 –.75]"
StringType "Expression"
}
NumRWorkDefines
0, 1,
or 2.
RworkDefine {
Present if NumRWorkDefines is greater than 0.
Name PrevT
Width 1
}
RWorkDefine {
Present if NumRWorkDefines is 2.
Name PrevU
Width
Equal to the width of the signal being integrated.
}
ParamSettings {
IntegratorMethod
ForwardEuler
, BackwardEuler, or Trapezoidal
ExternalReset
none
, rising, falling, or either
InitialConditionSource
internal
or external
LimitOutput
on
or off
ShowSaturationPort
on
or off
ShowStatePort
on
or off
ExternalX0
Only written when initial condition (IC) source is external.
This is the initial value of the signal entering the IC port.
}
Table A-3: Model.rtw File Contents — Block Specific Records (Continued)