Installation guide

Running M-Files in the Editor/Debugger
3 Select the configuration y ou want to delete.
4 Click the Remove
button
.
5 To undo the last d eletion, click the Undo button . You cannot undo the
last deletion after having closed the Edit M-File Configuration dialog box.
Reassociate and Rename Configurations
Each configuration is associated w ith a specific M-file. If you move or rename
the M-file, yo u need to redefine the association. If you delete an M-file, you
might want to delete the associated configurations, o r associate them with
a different M-file. You might also need to modify the statements in the
configurations so they will run.
When MATLAB cannot associate a configuration with an M-file, the Edit
M-File Configurations dialog box displays the M-file name in red, displays a
File Not Found message,andallowsyoutofindtheM-filetowhichyouwant
to associate the configuration. In this example, MATLAB cannot find the file
collatzplot_new.m, which has three configurations associated with it. For
this example,
collatzplot_new.m had be en renamed to collatzplot.m,
so the configurations associated with
collatzplot_new.m need to be
reassociated.
6-79