Installation guide

Accessibility
Setting Up JAWS
Make sure that JAWS is installed on your machine. If it is, there is probably a
shortcut to it on the Windows desktop.
Setting up JAWS involves these tasks:
1 Add the Access Bridge to your Windows path (for networked installation s
only).
2 Create the accessibility.properties file.
These tasks are described in more detail below.
(For Networked Installations Only) Add Access Bridge to Your Path.
If you are running MATLAB in a networked installation environment (that is,
if the MATLAB Installer was not run on y our m achine), you need to take the
following steps to add Access B ridge to your Windows path.
Note This procedure a ssumes your Windows Start button is set to Classic
mode. To set Classic mode, from the Start button, select Settings.Next
select Task Bar and Menu. Then select the Start Menu tab and make sure
the
Classic Start Menu option is enabled. Click OK and you are done.
1 From the Start button, select Settings, next select Control Panel. S croll
down and click the System icon to display the System Properties dialog box.
2 In the System Properties dialog box, select the Advanced tab.
3 Click Environment Variables.
4 Under System variables, select the Path option.
5 Click the Edit button.
6 To the start of the Path environment variable, add the directory that
contains
matlab.exe; f or example:
C:\matlab\bin\win32;
2-89