User`s guide

Clusters and Cluster Profiles

6-19

This creates and displays a new profile, called MJSProfile1.

Double-click the new profile name in the listing, and modify the profile name to be

MyMJSprofile1.

Click Edit in the tool strip so that you can set your profile property values.

In the Description field, enter the text MJS with 4 workers, as shown in the

following figure. Enter the host name for the machine on which the MJS is running,

and the name of the MJS. If you are entering information for an actual MJS already

running on your network, enter the appropriate text. If you are unsure about the

MJS (formerly known as a job manager) names and locations on your network, ask

your system administrator for help.

Note If the MJS is using a nondefault BASE_PORT setting as defined in the

mdce_def file, the Host property in the cluster profile must be appended with this

BASE_PORT number. For example, MJS-Host:40000.

Scroll down to the Workers section, and for the Range of number of workers, enter

the two-element vector [4 4]. This specifies that jobs using this profile require at

least four workers and no more than four workers. Therefore, a job using this profile

runs on exactly four workers, even if it has to wait until four workers are available

before starting.