User`s guide

2 Create Your First Report
2-22
• “Create the Magic Square” on page 2-29
• “Add Display Logic” on page 2-32
• “Display the Magic Square” on page 2-34
Create a For Loop
Note: This section builds on the previous tasks described in the step-by-step example
summarized in “Create a MATLAB Report” on page 2-2.
If you have not completed the previous sections of this example, see open the completed
report setup file: Magic Squares Report.
1
In the Outline pane on the left, select the Chapter component.
2
In the Library pane in the middle, under the Logical and Flow Control
category, double-click For Loop.
The Outline pane looks as follows.